Sorry to those of you still shell-shocked from the 2.0 (ipfwadm) to 2.2 (ipchains) transition. There's good and bad news.
Firstly, you can simply use ipchains and ipfwadm as before. To do this, you need to insmod the `ipchains.o' or `ipfwadm.o' kernel modules found in the latest netfilter distribution. These are mutually exclusive (you have been warned), and should not be combined with any other netfilter modules.
Once one of these modules is installed, you can use ipchains and ipfwadm as normal, with the following differences:
Hackers may also notice:
This is what most people want. If you have a dynamically allocated IP PPP dialup (if you don't know, this is you), you simply want to tell your box that all packets coming from your internal network should be made to look like they are coming from the PPP dialup box.
# Load the NAT module (this pulls in all the others). modprobe iptable_nat # In the NAT table (-t nat), Append a rule (-A) after routing # (POSTROUTING) for all packets going out ppp0 (-o ppp0) which says to # MASQUERADE the connection (-j MASQUERADE). iptables -t nat -A POSTROUTING -o ppp0 -j MASQUERADE # Turn on IP forwarding echo 1 > /proc/sys/net/ipv4/ip_forward
Note that you are not doing any packet filtering here: for that, see the Packet Filtering HOWTO: `Mixing NAT and Packet Filtering'.
This is a much more niche user base, so I didn't worry about backward compatibility as much. You can simply use `iptables -t nat' to do port forwarding. So for example, in Linux 2.2 you might have done:
# Linux 2.2 # Forward TCP packets going to port 8080 on 188.8.131.52 to 192.168.1.1's port 80 ipmasqadm portfw -a -P tcp -L 184.108.40.206 8080 -R 192.168.1.1 80
Now you would do:
# Linux 2.4 # Append a rule before routing (-A PREROUTING) to the NAT table (-t nat) that # TCP packets (-p tcp) going to 220.127.116.11 (-d 18.104.22.168) port 8080 (--dport 8080) # have their destination mapped (-j DNAT) to 192.168.1.1, port 80 # (--to 192.168.1.1:80). iptables -A PREROUTING -t nat -p tcp -d 22.214.171.124 --dport 8080 \ -j DNAT --to 192.168.1.1:80